LMP2012MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMP2012 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 930μA |
| Nominal Supply Current | 930μA |
| Output Current | 18mA |
| Max Supply Current | 2.4mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Output Current per Channel | 17mA |
| Input Offset Voltage (Vos) | 36μV |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 105dB |
| Average Bias Current-Max (IIB) | 0.000004μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 0.12μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP2012MA/NOPB Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 36μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 930μA , this buffer op amp will be able to operate. The voltage gain should stay at 105dB. The op amp ic has 2 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. In this case, LMP? represents the instrumentation amplifiers' series number.
LMP2012MA/NOPB Features
8 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
LMP2012MA/NOPB Applications
There are a lot of Texas Instruments LMP2012MA/NOPB Instrumentational OP Amps applications.
- Strain gauges
- Non-polarized electrodes
- Logarithmic operation circuits
- Video amplifiers
- Home audio systems
- Portable docking station
- High input resistance broadband
- Oscilloscopes
- Biopotential
- Professional videography