LMH6702MA/NOPB
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 12.5mA |
| Output Current | 80mA |
| Max Supply Current | 16.1mA |
| Slew Rate | 3100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 10V~12V ±5V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 1.7 GHz |
| Gain Bandwidth Product | 1.7 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1700000 kHz |
| Power Supply Rejection Ratio (PSRR) | 47dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.75V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 140MHz |
| Bias Current-Max (IIB) @25C | 30μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.75V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6702 |
| Pin Count | 8 |
LMH6702MA/NOPB Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the Current Feedback type. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. The input offset voltage is 4.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. This op amp contains 1 circuits. Buffer op amp is equipped with 1 channels on the device.
LMH6702MA/NOPB Features
8 Pins
supply voltage of 5V
LMH6702MA/NOPB Applications
There are a lot of Texas Instruments LMH6702MA/NOPB Instrumentational OP Amps applications.
- Professional videography
- E-book readers
- Video computer boards
- Weak signal detection
- Differentiator circuits
- Medical instruments
- Portable electronic products powered by batteries
- Cinema or auditorium audio system
- Wireless base stations
- Gaming industry