LMC662AIN/NOPB
| Parameters | |
|---|---|
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.000004μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000004μA |
| Programmable Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC662 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Nominal Supply Current | 750μA |
| Output Current | 40mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.002pA |
| Voltage - Supply, Single/Dual (±) | 4.75V~15.5V ±2.38V~7.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3.3mV |
| Bandwidth | 1.4MHz |
| Unity Gain BW-Nom | 1400 kHz |
LMC662AIN/NOPB Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tube case. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 3.3mV. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . 126.02dB should remain the voltage gain. The buffer amp consists of 2 circuits in total. Buffer op amp is equipped with 2 channels on the device. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
LMC662AIN/NOPB Features
8 Pins
supply voltage of 5V
126.02dB voltage gain
Output Type: Rail-to-Rail
LMC662AIN/NOPB Applications
There are a lot of Texas Instruments LMC662AIN/NOPB Instrumentational OP Amps applications.
- Automatic control
- Strain gauges
- Blood pressure sensors
- Professional videography
- Signal transformation
- Test equipment
- Micro signal measurement
- Large motor controllers
- Television broadcasting equipment
- Power transmission