LMC6482IN/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6482 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Nominal Supply Current | 1.3mA |
| Output Current | 30mA |
| Max Supply Current | 1.4mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 3V~15.5V ±1.5V~7.75V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 116.47dB |
| Average Bias Current-Max (IIB) | 0.000004μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 110μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000004μA |
| Programmable Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6482IN/NOPB Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 3mV. Through Hole is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Voltage gain should remain at 116.47dB. This op amp ic has 2 circuits. There are a total of 2 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps.
LMC6482IN/NOPB Features
8 Pins
supply voltage of 5V
116.47dB voltage gain
Output Type: Rail-to-Rail
LMC6482IN/NOPB Applications
There are a lot of Texas Instruments LMC6482IN/NOPB Instrumentational OP Amps applications.
- Subtraction operation circuits
- Differentiator circuits
- Cinema or auditorium audio system
- Signal amplification
- Digital cameras
- Active probe
- Scintillation detectors
- Video conversion and routing
- Fast A/D and D/A converters
- Medical imaging