LM74202QPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Voltage - Supply | 4.2V~40V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM74202 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 40V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Channels | 1 |
| Current - Output (Max) | 2.2A |
| Adjustable Threshold | YES |
| Current - Supply | 285μA |
| FET Type | N-Channel |
| Ratio - Input:Output | 1:1 |
| Internal Switch(s) | Yes |
| Delay Time - OFF | 9μs |
| Delay Time - ON | 80μs |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LM74202QPWPRQ1 Overview
The case is made of 16-PowerTSSOP (0.173, 4.40mm Width) plastic. A Tape & Reel (TR) case is a good choice for packing the part. There are two ways in which this part is mounted. The voltage that is applied to the circuit is 4.2V~40V. The minimum operating temperature of this component must not be -40°C~125°C TJ. The component connected in General Purpose is suitable for this component. There is a N+1 ORing Controller category assigned to the device. N-Channel is the type of FET. A 16 termination is available on the part. The part is based on LM74202. This device is powered by 12V in order to deliver a high level of performance. The purpose of this is to make sure that the supply current for the component at 285μA is running as it should be. This part requires a voltage supply (Vsup) of 4.2V or greater. There is a limit to the maximum supply voltage when Vsup reaches 40V. When the output current conducts under 2.2A, the chip can work. Automotive, AEC-Q100 series is the model number of the device.
LM74202QPWPRQ1 Features
in a 16-PowerTSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
16 terminations
LM74202QPWPRQ1 Applications
There are a lot of Texas Instruments LM74202QPWPRQ1 Ideal Diode controller applications.
- Active ORing for redundant power
- USB HUBs
- Automotive USB hubs
- AC Rectifier
- Factory automation and control - PLC digital output modules
- Head Unit
- Reverse Polarity Protection
- Asset tracker
- Electronic point of sale
- Active OR-ing of Redundant (N+1) Power Supplies