LM5112Q1SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM5112 |
| Number of Outputs | 1 |
| Output Current | 7A |
| Max Supply Current | 2mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 12 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 7A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 7A |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5112Q1SDX/NOPB Overview
A higher degree of flexibility is achieved by adopting its 6-WDFN Exposed Pad package.A packaging method of Tape & Reel (TR) is indicated.Gate drivers is mounted in the way of Surface Mount.By using 3.5V~14V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.This device allows temperatures in the range of -40°C~125°C TJ.Inverting, Non-Inverting is used as the input type.As a result of its configuration, it contains a maximum of 6 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number LM5112.Surface Mount is the way it takes to mount the device.The pins are configured with 6 when designing the chip.With a supply voltage of 12V, it is designed to operate.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.In terms of its basis, there are 1 outputs integrated.An output current of 7A is supported.To ensure high stability, the supply current should be kept at 2mA.Among the Automotive, AEC-Q100 series, this gate driver is included.
LM5112Q1SDX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
6 pins
Operating with the supply voltage of Automotive, AEC-Q100
LM5112Q1SDX/NOPB Applications
There are a lot of Texas Instruments LM5112Q1SDX/NOPB gate drivers applications.
- Refrigerator
- Industrial motor drives - compact, standard, premium, servo drives
- Telecom switch mode power supplies
- Uninterruptible Power Supplies (UPS)
- Digitally controlled power supplies
- A/D drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Controls
- Welding
- Isolated Supplies for controller area network (CAN),