LM5100MX/NOPB
| Parameters | |
|---|---|
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5100 |
| Pin Count | 8 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 1.5mA |
| Output Current | 1.8A |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Turn-Off Delay Time | 10 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 3V 8V |
| Turn Off Time | 0.045 µs |
LM5100MX/NOPB Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a power supply voltage of 9V~14V V, it is able to demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~125°C TJ.The input type is Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.You will find various related parts under the base part number LM5100.The device is mounted with Surface Mount.The pins are configured with 8 when designing the chip.In order to operate, a voltage of 12V has to be applied.An output current as high as 1.8A can be achieved at maximum power.A board with 8 component pins is available.The high-side voltage - Max (Bootstrap) can be up to 118V.The output current can be set to 1.8A.
LM5100MX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
LM5100MX/NOPB Applications
There are a lot of Texas Instruments LM5100MX/NOPB gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- AC-DC Inverters
- Portable computers
- Dual-Battery Systems
- Solar inverters
- Isolated Supplies for Motor Control
- Portable Navigation Devices
- Commercial and agricultural vehicles (CAV)
- A/D drivers
- DC-DC Converters