LM5070MTC-80/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 2.2Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 1.8V~75V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | LM5070 |
| Pin Count | 16 |
| Output Voltage | 250mV |
| Output Type | Voltage |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Voltage | 15V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 100mA |
| Output Power | 12.95W |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 75V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Max Duty Cycle | 80 % |
| Standards | 802.3af (PoE) |
| Duty Cycle | 80 % |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5070MTC-80/NOPB Overview
It is embedded in the Tube package.It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width).I would like to inform you that this PoE controller is of the Controller (PD), DC/DC type.There is a strong/weak growth in the number of channels: 1.PoE operates with the operating temperature of -40°C~125°C to ensure its reliability.This electrical Po E controller operates at voltage 1.8V~75V.There is a possibility of determining its Po E controllers by referring to the base part number LM5070.16 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.16 pins are equipped with it.There is a Po E controller like this in Switching Regulator or Controllers.There are 16 pins on the board that are designed for it.There is a certain temperature that this electrical ethernet power controller reaches during reflow (Cel) of 260.This mount is positioned in the way of the Surface Mount axis.1mA requires a supply current to function correctly.The frequency of this electrical PoE ethernet controller is 1MHz.100mA is a flexible design because of its high output current.PoE controllers operate at 75V volts.2.2Ohm (*) represents the PoE controller's resistance.Power output of this ethernet over power controller is 12.95W watts.This power over ethernet controller has an output voltage that is equal to 250mV.
LM5070MTC-80/NOPB Features
Tube package
16 pin count
16 pins
The output current of 100mA
2.2Ohm (Ω)
LM5070MTC-80/NOPB Applications
There are a lot of Texas Instruments LM5070MTC-80/NOPB Power Over Ethernet (PoE) Controllers applications.
- Lighting
- Dual Signature PD/Forced UPOE
- Power over Ethernet
- PoE powered device appliances
- 4PPOE
- Multiband access points
- Higher Power Ethernet Powered Devices
- Public Information Displays
- VoIP Phones
- High Temperature Industrial Applications