LM5050Q1MK-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Applications | Redundant Power Supplies |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 5V~75V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM5050 |
| Output Voltage | 75V |
| Operating Supply Current | 130μA |
| Element Configuration | Single |
| Nominal Supply Current | 130μA |
| Output Current | 15A |
| Quiescent Current | 400μA |
| FET Type | N-Channel |
| Turn-Off Delay Time | 486 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Number of Drivers | 1 |
| Max Junction Temperature (Tj) | 125°C |
| High Side Driver | YES |
| Ambient Temperature Range High | 50°C |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5050Q1MK-1/NOPB Overview
A SOT-23-6 Thin, TSOT-23-6 case is included. In this case, it is suitable to pack the part in a Tape & Reel (TR) case. In this case, the part is mounted in the Surface Mount direction. There is a voltage of 5V~75V applied to it. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~125°C. Suitable for components connected in Redundant Power Supplies. There is a N+1 ORing Controller classification for the device. In the case of FETs, N-Channel is recognized as the type. In the part there are 6 terminations that are available. The part is based on LM5050. This device is powered by 12V in order to deliver a high level of performance. A maximum reflow temperature of this part is used if 260 is to be run. Part of the MOSFET Drivers family. It is a part that has 6 pins in it. A supply current of 130μA is used to operate the device when it is in operation. As a rule of thumb, the best result is achieved when the part is mounted by the Surface Mount axis. The device belongs to Automotive, AEC-Q100 series. As a result of this, 15A is the maximum output current that is capable of being delivered to the component. There is a maximum voltage of 75V at its output. A quiescent current is used at 400μA for this purpose.
LM5050Q1MK-1/NOPB Features
in a SOT-23-6 Thin, TSOT-23-6 case
FET Type: N-Channel
6 terminations
Peak Reflow Temperature (Cel) : 260
LM5050Q1MK-1/NOPB Applications
There are a lot of Texas Instruments LM5050Q1MK-1/NOPB Ideal Diode controller applications.
- Active ORing for redundant power
- Active ORing for redundant power supplies
- Digital Radios
- MP3 Players
- Head Unit
- Automotive USB hubs
- Industrial motor drives
- Alternator
- Power supply reverse polarity protection
- Automotive battery protection