LM5020SDX-2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5020 |
| JESD-30 Code | S-PDSO-N8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Quiescent Current | 2mA |
| Output Power | 300W |
| Control Features | Frequency Control, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~630kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 18ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5020SDX-2 Overview
Capsuled in the 10-WDFN Exposed Pad package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 8V~15V. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 200kHz~630kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 8. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. You can find other relevant dc to dc converter ics by searching "LM5020". 10 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 7V. At most, the dc to dc regulator accepts 90V input voltage. If you start a project, note down the dc dc regulator's usual output current of 1A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 1MHz is the maximum frequency of this dc regulators. The dc switching utilizes 2mA when it is in a dormant state.
LM5020SDX-2 Features
Transistor Driver Outputs
Switching Frequency: 200kHz~630kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5020SDX-2 Applications
There are a lot of Texas Instruments LM5020SDX-2 DC to DC converter applications.
- Electric heating, lighting
- Serial communication converter
- Digital display device
- Scientific research
- Series voltage regulation circuits
- Die casting equipment
- Special machining machine tools
- Linear guide
- Product burn-in
- Domestic water pumps