LM4940TS/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-10 (9 Leads + Tab) |
| Surface Mount | YES |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 9 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 10V~16V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Base Part Number | LM4940 |
| Pin Count | 4 |
| Output Type | 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 16V |
| Supply Voltage-Min (Vsup) | 10V |
| Number of Channels | 2 |
| Nominal Supply Current | 16mA |
| Quiescent Current | 16mA |
| Output Power | 6W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 56dB |
| Max Output Power | 6W |
| Max Output Power x Channels @ Load | 6W x 2 @ 4 Ω |
| Load Impedance | 4Ohm |
| Height | 4.8mm |
| Length | 10.16mm |
| Width | 8.687mm |
| Thickness | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM4940TS/NOPB Overview
A device has been embedded in TO-263-10 (9 Leads + Tab) .In this case, it is packaged as Tube .In addition, 9 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.2-Channel (Stereo) is used for its output.The type of this electrical device is Class AB .In a computer or other communication device, there are 9 pins, which are pronged contacts.A part of this electronic device is mounted in the way of Surface Mount .The supply voltage of this electrical device is 10V~16V .Channels 2 are present in the device.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection, Shutdown .Ideally, the operating temperature should not exceed -40°C~85°C TA .The number of pins is 4 .Audio/Video Amplifiers incorporates this part.Amp parts is a member of the LM4940 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 6W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 10V .During this time, the maximum supply voltage (Vsup) reaches 16V .Single is the type of supply for this electronic part.Boomer? is the series number for this electronic part.Without external influences, it consumes 16mA of quiescent current.
LM4940TS/NOPB Features
TO-263-10 (9 Leads + Tab) package
4 pin count
LM4940 family
6W kWh per hour
Boomer? series
LM4940TS/NOPB Applications
There are a lot of Texas Instruments LM4940TS/NOPB audio amplifiers applications.
- Biopotential
- Band-pass filter
- Automation control systems
- High gain DC amplifier
- Precision measurement
- Multiplication and division circuits
- Scintillation detectors
- Medical imaging
- Professional videography
- Signal amplification