LM393DR2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 570mW |
| Output Current | 100pA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.5 μs |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1V |
| Input Bias Current | 250nA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM393DR2 Overview
The product is packaged in SOIC for ease of transportation.Output type TTL is used for this comparator.Ready for shipping in Cut Tape (CT) package.There are 8 terminals on the comparator.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .In total, it contains 2 elements.The device includes 8 pins.Electronic comparator has 8 pins.Try search LM393 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 2.5mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 1mA when using the device.If the current supply exceeds 1mA , the comparator could malfunction.5V power supplies are enough to run the device.According to the voltage formula, the part has a voltage gain of 106.02dB .There is no need to exceed 70°C in terms of temperature.Comparator electronics cannot be operated at temperatures below 0°C .The maximal supply voltage of the comparator is 36V .This comparator can be supplied with a voltage as low as 2V .
LM393DR2 Features
TTL output capability
General Purpose IC
Employing 2 elements
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393DR2 Applications
There are a lot of ON Semiconductor LM393DR2 linear comparators applications.
- Window Comparators
- Point of load regulators
- Ultra-Low Power Systems
- Set Top Boxes
- Mobile Phones and Tablets
- Portable and Battery-Powered Systems
- Consumer Medical Electronics
- Window Comparators, Multivibrators
- Wireless Base Stations
- Security Detection Systems