LM3488MMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM3488 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 300V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 2.97V~40V |
| Quiescent Current | 2.7mA |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 2.97V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3488MMX Overview
With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 2.97V~40V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 100kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. An array of 8 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. In addition to "LM3488", there are other relevant dc to dc converter ics you can find. In total, switching converter has 8 pins. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 2.97V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 300V voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. This dc regulatorhas a max frequency of 1MHz. Users should apply 40V to operate the voltage regulator dc to dc safely and reliably. The dc switching utilizes 2.7mA when it is in a dormant state.
LM3488MMX Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
LM3488MMX Applications
There are a lot of Texas Instruments LM3488MMX DC to DC converter applications.
- CNC system
- Overvoltage protection circuits in TV sets
- Thermal power
- Electrical power transmission
- Network technology
- Television equipment
- Digital precision reference circuits
- Hydrogen power
- Digital display device
- Textile machinery