LM3302N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.05W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM3302 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 800μA |
| Power Dissipation | 1.05W |
| Output Current | 20mA |
| Max Supply Current | 200μA |
| Quiescent Current | 800μA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~28V ±1V~14V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 20mV |
| Voltage Gain | 89.54dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 28V |
| Max Input Current | 500nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 500nA |
| Voltage - Input Offset (Max) | 20mV @ 28V |
| Current - Input Bias (Max) | 0.5μA @ 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3302N Overview
For convenience, it is packaged in 14-DIP (0.300, 7.62mm) .There is a CMOS, MOS, Open-Collector, TTL output type for this comparator.Electronic comparator is shipped by Tube .14 terminals are found on the comparator.Electronic comparator is a part of Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical General Purpose comparator.There are a total of 4 elements in it.As a result, it contains 14 pins.In general, mounting type Through Hole is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator is equipped with 14 pins.You may wish to search LM3302 for more solutions that address your specific needs.A quiescent current of 800μA is displayed by this comparator.There is a Through Hole for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 800μA .If the current supply exceeds 200μA , the comparator might be damaged.In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum of 500nA current into the device.Based on the voltage formula, the voltage gain of the part is 89.54dB .
LM3302N Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 800μA
Voltage Gain: 89.54dB
LM3302N Applications
There are a lot of Texas Instruments LM3302N linear comparators applications.
- Limit Comparators
- Mobile Phones and Tablets
- Laptop Computers
- Factory automation & control
- Power management
- Wearable Devices
- Automatic Test Equipment
- Handheld Instruments
- Portable and Battery-Powered Systems
- Hand-Held Electronics