LM2904PT
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM2904 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 1.2mA |
| Output Current | 40mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.1MHz |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 2mV |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Dual Supply Voltage | 9V |
| Height | 1mm |
| Length | 3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2904PT Overview
In the package, you will find a 8-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 7mV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 700μA . Voltage gain should remain at 100dB. Op amp ic has 2 channels. The operating supply voltage of the buffer op amp is rated at 15V. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
LM2904PT Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM2904PT Applications
There are a lot of STMicroelectronics LM2904PT Instrumentational OP Amps applications.
- High gain DC amplifier
- Polarized electrodes
- MP3
- Proportional operation circuits
- E-book readers
- Thermocouples
- Multiplication circuits
- Car stereo
- Band-pass filter
- Logarithmic operation circuits