LM25061PMME-2/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Applications | General Purpose |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.6 VOLT |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.9V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Depth | 3.1mm |
| Base Part Number | LM25061 |
| Pin Count | 10 |
| Output Voltage | 19.5V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 2.4mA |
| Nominal Input Voltage | 17V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, UVLO |
| Feature Pins | FB, PGD, TIMER, (UVLO, EN) |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25061PMME-2/NOPB Overview
As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, it is included.Channel 1 is currently available.The package resembles a Tape & Reel (TR).Hot-swappable device terminates wHot-swappable deviceh 10 in total.This device has a terminal position of DUAL.10 pins make up its total.A supply voltage of 12V allows for high efficiency.Surface Mount has set it up this way.Hot-swappable device is classified as a Hot Swap Controller electrical component.Ensure reliable operation by setting the temperature to -40°C~85°C.Hot-swappable device has General Purpose applications.As you can see in Auto Retry, it's featured.In the case of a 2.9V~17VV power source, it should work just fine.Numbers in the LM25061 family include it.During operation, 10 pins are used.Despite its self-contained nature, Power Management Circuits is a very compact device.Current Limit, Fault Timeout, UVLO is its programmable feature.Presently, 1.6mA is in short supply.Surface Mount is the direction in which it is positioned.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.9V in order to maintain normal operation.During operation, it can supply a maximum current of 2.4mA.This device can also be used to produce RESET THRESHOLD VOLTAGE IS 2.6 VOLT as well.19.5V output voltages are capable of high efficiency.
LM25061PMME-2/NOPB Features
The terminal position of 10
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, UVLO
Output voltage of 19.5V
LM25061PMME-2/NOPB Applications
There are a lot of Texas Instruments LM25061PMME-2/NOPB hot swap controllers applications.
- Distributed power systems
- Circuit breakers for electronic circuits
- Electric vehicle
- PC board hot swap insertion and removal
- Server backplane system
- Power supply hotswap & inrush control
- Automotive circuits
- High power circuit board
- Undervoltage protection
- Redundant Array of Disks (RAID)