LM193AYDT
| Parameters | |
|---|---|
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM193 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Output Current | 16mA |
| Quiescent Current | 2.5mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 36V |
| Screening Level | AEC-Q100 |
| Max Input Current | 100nA |
LM193AYDT Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .This is a 2 element comparator.The board includes 8 pins.The recommended mounting method is Surface Mount .A temperature setting of -55°C~125°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.Search LM193 to find more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The device can be run with 5V power supplies.The maximal current your can input into the device is 100nA .
LM193AYDT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 2.5mA
LM193AYDT Applications
There are a lot of STMicroelectronics LM193AYDT linear comparators applications.
- Wearable Devices
- Wireless Base Stations
- Hand-Held Electronics
- Portable Battery Monitoring
- Pulse, Squarewave, and Time Delay Generators
- High-Speed Differential Line Receiver
- Security Detection Systems
- General Purpose Low Voltage Applications
- Infotainment and Clusters
- Mobile Phones