LF347N
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | LF347 |
| Pin Count | 14 |
| Number of Channels | 4 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 10.8mA |
| Power Dissipation | 680mW |
| Output Current | 60mA |
| Min Input Voltage | -12V |
| Slew Rate | 16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Max Input Voltage | 15V |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.02μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 3mV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
LF347N Description
:
The LF347N is a rapid slewrate device with a broad gain bandwidth. a monolithic integrated circuit with well-matched high-voltage J–FET and bipolar transistors
Their mathced high-voltage JFET inputs also provide high slew speeds, low input bias, low offset current, and low offset voltage temperature coefficient. High-speed integrators, digital-to-analog converters, sample-and-hold circuits, and a variety of other circuits are examples of this. The LF347N has a temperature range of 0 to 70 degrees Celsius.
LF347N Features
:
Low power comsumption
Wide common-mode(up to Vcc+) and differential voltage range.
Low input bias and offset current
Output short-circuit protection
High input impedance JFET input stage
Internal frequency compensation
Latch up free operation
High slew rate: 16V/μs (typ)
LF347N Applications
:
Oscilloscopes
Pro Audio Mixers
Renewables:Solar Inverters
Motor Integrated Systems:UPS
Drives and Control Solutions:AC Inverters and VF drives
:
The LF347N is a rapid slewrate device with a broad gain bandwidth. a monolithic integrated circuit with well-matched high-voltage J–FET and bipolar transistors
Their mathced high-voltage JFET inputs also provide high slew speeds, low input bias, low offset current, and low offset voltage temperature coefficient. High-speed integrators, digital-to-analog converters, sample-and-hold circuits, and a variety of other circuits are examples of this. The LF347N has a temperature range of 0 to 70 degrees Celsius.
LF347N Features
:
Low power comsumption
Wide common-mode(up to Vcc+) and differential voltage range.
Low input bias and offset current
Output short-circuit protection
High input impedance JFET input stage
Internal frequency compensation
Latch up free operation
High slew rate: 16V/μs (typ)
LF347N Applications
:
Oscilloscopes
Pro Audio Mixers
Renewables:Solar Inverters
Motor Integrated Systems:UPS
Drives and Control Solutions:AC Inverters and VF drives