LC51024MV-75FN672I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC51024 |
| Pin Count | 672 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 88kB |
| Operating Supply Current | 75mA |
| Number of I/O | 381 |
| Nominal Supply Current | 75mA |
| RAM Size | 64kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 7.5 ns |
| Number of Programmable I/O | 132 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1024 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC51024MV-75FN672I Overview
There are 1024 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 672-BBGApackage, you will find it.This device has 381 I/O ports programmed into it.The termination of a device is set to [0].BOTTOMis the terminal position of this electrical part.There is 3.3V voltage supply for this device.It is a part of the family [0].Trayshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.As part of the ispXPLD? 5000MVseries, it is a type of FPGA.It is equipped with 672 pin count.The device can also be used to find [0].The LC51024indicates that related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.A total of 672pins are provided on this board.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 3V is required for this device to operate.A logic element or block has 32elements.A total of 132programmable I/Os are available.The frequency that can be achieved is 200MHz.Using the devices' 88kBmemory, programs and data can be stored.
LC51024MV-75FN672I Features
672-BBGA package
381 I/Os
The operating temperature of -40°C~105°C TJ
672 pin count
672 pins
LC51024MV-75FN672I Applications
There are a lot of Lattice Semiconductor Corporation LC51024MV-75FN672I CPLDs applications.
- Bootloaders for FPGAs
- Random logic replacement
- Programmable polarity
- Page register
- USB Bus
- Cross-Matrix Switch
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- D/T registers and latches
- Programmable power management
- Address decoders