LC4512V-10TN176I
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4512V-10TN176I Overview
The mobile phone network has 512 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a 176-LQFP package containing it.It is programmed with 128 I/Os.It is programmed to terminate devices at [0].QUADis the terminal position of this electrical part.The power source is powered by 3.3Vvolts.This part is in the family [0].Package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended to mount the chip by Surface Mount.It belongs to the ispMACH? 4000Vseries of FPGAs.It has 176pins programmed.Additionally, this device is capable of displaying [0].Its related parts can be found in the [0].In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.The electronic component is mounted by Surface Mount.The device has a pinout of [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are 32 logic elements or blocks present.There are 48 Programmable I/Os.There can be 125MHz frequency achieved.The status of input signals is detected by 4dedicated inputs.There are 36 logic elements/cells to form a fundamental building block.
LC4512V-10TN176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4512V-10TN176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512V-10TN176I CPLDs applications.
- USB Bus
- Multiple Clock Source Selection
- Discrete logic functions
- Auxiliary Power Supply Isolated and Non-isolated
- Software-driven hardware configuration
- POWER-SAVING MODES
- Complex programmable logic devices
- Code converters
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Programmable power management