LC4256C-75T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 96 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-75T100C Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 100-LQFPpackage, you will find it.In this case, there are 64 I/Os programmed.There are 100 terminations programmed into the device.QUADis the terminal position of this electrical part.An electrical supply voltage of 1.8V is used to power it.It is a part of family [0].Package the chip by Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of ispMACH? 4000Cseries FPGA.100pins are programmed on the chip.This device also displays [0].The LC4256indicates that its related parts can be found.If high efficiency is desired, the supply voltage should be kept at [0].In order to store data, EEPROMis used.Surface Mountmounts this electronic component.There are 100 pins on the device.There is a maximum supply voltage of 1.95V.Despite its minimal supply voltage of [0], it is capable of operating.A programmable I/O count of 96 has been recorded.It is recommended not to exceed 322MHzin terms of frequency.Input signals are detected by 10dedicated inputs.Basic building blocks have 16logic elements.
LC4256C-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4256C-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-75T100C CPLDs applications.
- Battery operated portable devices
- Digital multiplexers
- ON-CHIP OSCILLATOR CIRCUIT
- Boolean function generators
- I2C BUS INTERFACE
- Cross-Matrix Switch
- STANDARD SERIAL INTERFACE UART
- Power automation
- I/O expansion
- TIMERS/COUNTERS