LC4128V-5T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128V-5T100C Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].The device has 64inputs and outputs.It is programmed that device terminations will be 100 .There is a QUADterminal position on the electrical part in question.It is powered from a supply voltage of 3.3V.This part is in the family [0].Trayshould be used to package the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].There should be a Surface Mounton the chip.This type of FPGA is a part of the ispMACH? 4000V series.A chip with 100pins is programmed.It is also possible to find YESwhen using this device.The LC4128contains its related parts.High efficiency requires a voltage supply of [0].It is adopted to store data in [0].The electronic component is mounted by Surface Mount.There are 100pins on it.There is a maximum supply voltage of 3.6V.A minimum supply voltage of 3V is required for this device to operate.In total, there are 8 logic elements/blocks.There is a maximum frequency of 227.27MHz.The status of input signals is detected by 10dedicated inputs.In order to form a fundamental building block, there are 36logic elements/cells.
LC4128V-5T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128V-5T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-5T100C CPLDs applications.
- D/T registers and latches
- Interface bridging
- DDC INTERFACE
- Software-driven hardware configuration
- Digital systems
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Storage Cards and Storage Racks
- Dedicated input registers
- ToR/Aggregation/Core Switch and Router
- Programmable power management