LC4128C-27TN128C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4128 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 92 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 2.7ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4128C-27TN128C Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].It is programmed with 92 I/Os.It is programmed to terminate devices at [0].This electrical part has a terminal position of QUADand is connected to the ground.It is powered by a voltage of 1.8V volts.This part is in the family [0].Ideally, the chip should be packaged by Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.Mount the chip by Surface Mount.FPGAs belonging to the ispMACH? 4000Cseries contain this type of chip.In this chip, the 128pins are programmed.This device also displays [0].There are related parts in [0].High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.A Surface Mountis mounted on this electronic component.It operates with the maximal supply voltage of 1.95V.It operates with the minimal supply voltage of 1.65V.There are 8 logic elements or blocks present.A total of 484programmable I/Os are available.There should be a lower maximum frequency than 333MHz.Input signals are detected by 4dedicated inputs.
LC4128C-27TN128C Features
128-LQFP package
92 I/Os
The operating temperature of 0°C~90°C TJ
128 pin count
LC4128C-27TN128C Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-27TN128C CPLDs applications.
- Reset swapping
- Power up sequencing
- Boolean function generators
- Pattern recognition
- High speed graphics processing
- LED Lighting systems
- Configurable Addressing of I/O Boards
- Software-driven hardware configuration
- State machine design
- Protection relays