LC4064ZC-5T48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-5T48I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].There are 32 I/Os on the board.48terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is provided by a supply voltage of 1.8V volts.There is a part included in Programmable Logic Devices.The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Zseries FPGA.There are 48 pins on the chip.This device is also capable of displaying [0].You can find its related parts in the [0].High efficiency requires the supply voltage to be maintained at [0].It is adopted to store data in [0].It is mounted by Surface Mount.There are 48pins on it.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.In order for it to operate, a supply voltage of 1.7Vis required.There are 484 programmable I/Os in this system.In this case, 250MHzis the frequency that can be achieved.The status of input signals is detected by 4dedicated inputs.In order to form a fundamental building block, there are 4logic elements/cells.
LC4064ZC-5T48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064ZC-5T48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5T48I CPLDs applications.
- Address decoding
- Protection relays
- D/T registers and latches
- Preset swapping
- Parity generators
- Random logic replacement
- State machine control
- I/O PORTS (MCU MODULE)
- Digital systems
- Auxiliary Power Supply Isolated and Non-isolated