LC4064V-75TN44I
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 388 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 4 |
| Height | 1mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064V-75TN44I Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a 44-TQFP package containing it.This device has 30 I/O ports programmed into it.Devices are programmed with terminations of [0].The terminal position of this electrical component is QUAD.An electrical supply voltage of 3.3V is used to power it.There is a part in the family [0].Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.Ensure that the chip is mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000V series.A chip with 44pins is programmed.This device is also capable of displaying [0].The LC4064contains its related parts.High efficiency requires a voltage supply of [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.The pins are [0].There is a maximum supply voltage of 3.6V.The device is designed to operate with a minimal supply voltage of 3VV.This logic block consists of 4logic elements.Programmable I/Os are counted up 388.The frequency that can be achieved is 178.57MHz.Input signals are detected using 2dedicated inputs.Fundamental building blocks consist of 36logic elements/cells.
LC4064V-75TN44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4064V-75TN44I Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-75TN44I CPLDs applications.
- Address decoders
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Wide Vin Industrial low power SMPS
- Timing control
- High speed graphics processing
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Cross-Matrix Switch
- POWER-SAVING MODES
- TIMERS/COUNTERS
- Boolean function generators