LC4064V-25T100C
| Parameters | |
|---|---|
| Frequency | 454.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Programmable I/O | 272 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
LC4064V-25T100C Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the 100-LQFP package.The device has 64inputs and outputs.The termination of a device is set to [0].QUADis the terminal position of this electrical part.It is powered by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is packaged in the way of Tray.To ensure its reliability, the operating temperature is set to [0].It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000V series.It is equipped with 100 pin count.This device is also capable of displaying [0].Its related parts can be found in the [0].Optimal efficiency requires a supply voltage of [0].It is recommended to store data in [0].The electronic part is mounted by Surface Mount.The device has a pinout of [0].In this case, the maximum supply voltage is 3.6V.It operates with the minimal supply voltage of 3V.There are 272 Programmable I/Os.It is possible to achieve a frequency of 454.5MHz.The status of input signals is determined by 10dedicated inputs.Fundamental building blocks consist of 4logic elements/cells.
LC4064V-25T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064V-25T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-25T100C CPLDs applications.
- Reset swapping
- Power up sequencing
- Synchronous or asynchronous mode
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- INTERRUPT SYSTEM
- Address decoders
- STANDARD SERIAL INTERFACE UART
- Custom shift registers
- Cross-Matrix Switch
- PULSE WIDTH MODULATION (PWM)