LC4032V-75TN44E
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Gates | 800 |
| Number of Programmable I/O | 176 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 2 |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4032V-75TN44E Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the 44-TQFP package.There are 30 I/Os on the board.It is programmed that device terminations will be 44 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered from a supply voltage of 3.3V.This part is included in Programmable Logic Devices.Package the chip by Tray.During operation, the operating temperature is kept at -40°C~130°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Vseries FPGA.The chip is programmed with 44 pins.When using this device, YEScan also be found.There are related parts in [0].For digital circuits, there are 800gates. These devices serve as building blocks.Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].A Surface Mountis mounted on this electronic component.The 44pins are designed into the board.It operates with the maximal supply voltage of 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.A total of 2logic elements/blocks are present.A total of 176Programmable I/Os are present.It is possible to achieve a frequency of 178.57MHz.The status of input signals is detected by 2dedicated inputs.There are 36 logic elements/cells on the device.
LC4032V-75TN44E Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~130°C TJ
44 pin count
44 pins
LC4032V-75TN44E Applications
There are a lot of Lattice Semiconductor Corporation LC4032V-75TN44E CPLDs applications.
- ROM patching
- State machine design
- Dedicated input registers
- Address decoders
- Multiple DIP Switch Replacement
- Interface bridging
- Programmable power management
- ON-CHIP OSCILLATOR CIRCUIT
- Voltage level translation
- Timing control