LB1940T-MPB-E
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose, Stepper Motors |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 1.9V TO 6.5V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 1.9V~6.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Voltage | 950mV |
| Operating Supply Voltage | 6.5V |
| Supply Voltage-Max (Vsup) | 7.5V |
| Power Supplies | 35V |
| Supply Voltage-Min (Vsup) | 1.9V |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 800mW |
| Output Current | 400mA |
| Output Current per Channel | 400mA |
| Supply Current-Max (Isup) | 7mA |
| Voltage - Load | 1.6V~7.5V |
| Load Type | Inductive |
| Height Seated (Max) | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB1940T-MPB-E Overview
For packaging, it is used with Tube.H bridge is provided in the 20-TSSOP (0.173, 4.40mm Width) package for the sake of cost savings.The supply voltage of 1.9V~6.5V can improve reliabilbridge drivery.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge's operating temperature enables -20°C~85°C TA to function normally.H bridge motor driver can be used for a variety of purposes, including DC Motors, General Purpose, Stepper Motors.H gate is mounted on the PCB using Surface Mount.It is possible to terminate a transmission line with a 20 termination using the H bridge which matches the characteristic impedance of the transmission line.In signal interfaces, 20 pins serve as pronged contacts.With a supply voltage of 5V, H bridge circuit operates.This H bridge circuit incorporates an analog IC with the type STEPPER MOTOR CONTROLLER.The output and power supply pins are flowing wH-bridgeh current 400mA.It is through 20 pins that this bridge driver is able to perform its specific functions.Under the subcategory of Motion Control Electronics, this H bridge motor driver shares various similarities with other parts.In order to maintain a high level of efficiency, the operating supply voltage is maintained at 6.5V.It is calculated that the Hbridge releases 950mV volts.There is a supply of electricity from 35V to the electrical load.As an additional option, ALSO OPERATES WITH THE RANGE OF 1.9V TO 6.5V SUPPLY can be provided.
LB1940T-MPB-E Features
Available in 20-TSSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Number of Receivers: 6.5V
With ALSO OPERATES WITH THE RANGE OF 1.9V TO 6.5V SUPPLY Drivers
LB1940T-MPB-E Applications
There are a lot of ON Semiconductor LB1940T-MPB-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators for CPUs
- Telecom Microprocessor
- DVD players
- Non-V-Core
- OA equipments
- Workstations
- Voltage Regulators for DDR memory arrays
- PC peripherals
- Notebook Computers
- Voltage Regulators for GPUs