L6747CTR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.25W |
| Voltage - Supply | 5V~12V |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L6747 |
| Qualification Status | Not Qualified |
| Max Output Current | 3.5A |
| Operating Supply Current | 3.5mA |
| Element Configuration | Dual |
| Power Dissipation | 2.25W |
| Output Current | 1.5A |
| Max Supply Current | 3.5mA |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3.5A - |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| High Side Voltage - Max (Bootstrap) | 41V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6747CTR Overview
Gate drivers provides greater flexibilGate driversy to use the 8-VFDFN Exposed Pad package.Tape & Reel (TR) is the packaging method.A total of 2 drivers are integrated into its configuration.Surface Mount is mounted in the way.In the absence of a 5V~12V supply voltage, its superiority can be demonstrated.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device can operate at temperatures up to 0°C~125°C TJ.A type of Non-Inverting is used for input in this program.It's configured with 8 terminations.The base part number L6747 refers to a number of related parts.Devices are mounted by Surface Mount.When designing, the device is configured with 8 pins.The device is specifically designed to function with a supply voltage of 12V V.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 3.5A.There are various useful electronic components in its subcategory MOSFET Drivers.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 41V.Mosfet gate drivers can deliver a current of 1.5A.2.25W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.If you want a stable supply current, you should keep it at 3.5mA.The supply voltage of this device is 3.5mA and it operates with that voltage.
L6747CTR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 41V
Maximum power dissipation of 2.25W
L6747CTR Applications
There are a lot of STMicroelectronics L6747CTR gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Power factor correction (PFC) circuits
- Commercial and agricultural vehicles (CAV)
- Broadcast equipment
- Multicolor LED/laser displays
- Motor controllers
- Motor Control
- Smart Phones
- Portable computers
- Motor Drives