L293D
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Manufacturer Package Identifier | Powerdip 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| Voltage - Supply | 4.5V~36V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | L293 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Max Output Current | 1.2A |
| Operating Supply Voltage | 24V |
| Number of Channels | 4 |
| Interface | Parallel |
| Operating Supply Current | 2mA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 4W |
| Output Characteristics | 3-STATE |
| Output Current per Channel | 600mA |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 600mA |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Voltage - Load | 4.5V~36V |
| Output Peak Current Limit-Nom | 1.2A |
| Supply Voltage1-Nom | 24V |
| Min Supply Voltage (DC) | 4.5V |
| Built-in Protections | TRANSIENT; THERMAL |
| Motor Type | Brushed |
| Output Current Flow Direction | SOURCE SINK |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L293D Description
L293D can be described as a monolithic, integrated high-current, high-voltage four-channel driver built to support the standard DTL or TTL level of logic. An independent supply input is available to power the logic, allowing it to operate at a lower voltage as well as internal clamp diodes can be found. This unit is suitable for switching applications that require frequencies that exceed 5 kHz.
L293D Features
INTERNAL CLAMP DIODES
600mA OUTPUT CURRENT CAPABILITY PER CHANNEL
ENABLE FACILITY
1.2A PEAK OUTPUT CURRENT (non repetitive) PER CHANNEL
LOGICAL \"0\" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
OVERTEMPERATURE PROTECTION
L293D Applications
Switching application
L293D can be described as a monolithic, integrated high-current, high-voltage four-channel driver built to support the standard DTL or TTL level of logic. An independent supply input is available to power the logic, allowing it to operate at a lower voltage as well as internal clamp diodes can be found. This unit is suitable for switching applications that require frequencies that exceed 5 kHz.
L293D Features
INTERNAL CLAMP DIODES
600mA OUTPUT CURRENT CAPABILITY PER CHANNEL
ENABLE FACILITY
1.2A PEAK OUTPUT CURRENT (non repetitive) PER CHANNEL
LOGICAL \"0\" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
OVERTEMPERATURE PROTECTION
L293D Applications
Switching application