JM38510/30605SDA
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Number of Pins | 14 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | GATED SERIAL INPUTS (A AND B) |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 36 ns |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Prop. Delay@Nom-Sup | 32 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 27mA |
| fmax-Min | 25 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.03mm |
| Length | 9.21mm |
| Width | 5.97mm |
| Thickness | 1.59mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
JM38510/30605SDA Overview
14 is the sum of the number of terminations in the chip. Parts with a 5V operating supply voltage are specified. On this part, there are 1 elements. In this device, there are 14 pins. The mounting method should be Surface Mount. There is an electronic component in the LS. This chip's operating supply voltage is reported as 5V. Taking note of the following additional details: GATED SERIAL INPUTS (A AND B). There are 8 bits in the IC chip. The total number of pins is 14. Using it below 125°C is recommended. Operation of this device requires a value greater than -55°C. 5.5V is the supply voltage used. This supply voltage is employed higher than 4.5V. In order to package the part properly, TUBE is used.
JM38510/30605SDA Features
With 14 pins
Operate supply voltage at 5V
Packing Method : TUBE
JM38510/30605SDA Applications
There are a lot of Texas Instruments JM38510/30605SDA Shift Registers applications.
- data transfer
- Dual-rank shift, hold, and bus applications
- Data manipulation
- temporary data storage
- 8-bit data storage
- ROM Chips
- 7-segment display control
- Pattern Recognizers
- Data Format Converters
- Parallel data