JM38510/30601BFA
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 30 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 26 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 23mA |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.03mm |
| Length | 10.3mm |
| Width | 6.73mm |
| Thickness | 1.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
JM38510/30601BFA Overview
This chip has a total termination count of 16. A Rail/Tube case is used to pack it. The part operates at 5V voltage. 1 elements make up this part. 16 pins are available on the device. Mounting by Surface Mount is recommended. Electronic components fall under the category of LS. As noted, this chip operates within the range of 5V. This section has the following additional features: HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK. There are 4 bits in the IC chip. In total, there are 16 pins on it. It is recommended that it be used at temperatures below 125°C. In order for this device to function, the value should not be less than -55°C. A voltage of 5.5V is used to supply this voltage. There is a voltage applied to the supply that is greater than 4.5V.
JM38510/30601BFA Features
With 16 pins
Operate supply voltage at 5V
JM38510/30601BFA Applications
There are a lot of Texas Instruments JM38510/30601BFA Shift Registers applications.
- Pulse Extenders
- temporary data storage
- ROM Chips
- Interconnectors
- data transfer
- Flash Memory
- Parallel to serial converter
- Serial-to-parallel data conversion
- Data manipulation
- 7-segment display control