JM38510/30601BEA
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 26 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 23mA |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
JM38510/30601BEA Overview
The device is embedded in CDIP package. The number of the chip's terminations sums up to 16. The part operates at 5V voltage. 1 elements make up this part. 16 pins are present on the device. As a general recommendation, mounting by Through Hole is recommended. In the LS series, the electronic component belongs. This chip's operating supply voltage is reported as 5V. This section has the following additional features: HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK. A total of 4 bits are present on an IC chip. There are a total of 16 pins on it. A temperature below 125°C is recommended for its use. Ideally, it should not fall below -55°C. A voltage of 5.5V is used to supply this voltage. This supply voltage is employed higher than 4.5V. In order to package the part properly, TUBE is used.
JM38510/30601BEA Features
With 16 pins
Operate supply voltage at 5V
Packing Method : TUBE
JM38510/30601BEA Applications
There are a lot of Texas Instruments JM38510/30601BEA Shift Registers applications.
- Parallel data
- Serial-to-parallel data conversion
- Remote control holding register
- Delay Line
- Serial to parallel converter
- Interconnectors
- Flash Memory
- Parallel to serial converter
- 7-segment display control
- 8-bit data storage