JM38510/30601B2A
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 30 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 26 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 23mA |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| Thickness | 1.83mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
JM38510/30601B2A Overview
20 is the sum of the number of terminations in the chip. The case Rail/Tube contains it. The part's operating supply voltage is rated 5V. On this part, there are 1 elements. It has 20 pins. The mounting method should be Surface Mount. There is an electronic component in the LS. A range of 5V is noted as the operating supply voltage of this chip. Additional aspects of this section are as follows: HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK. A total of 4 bits are present on an IC chip. This board has 20 pins in total. Under temperatures below 125°C, it is recommended to use it. For this device to work, it should not go below -55°C. Under 5.5V, this voltage is employed. It is important to note that this supply voltage is higher than 4.5V.
JM38510/30601B2A Features
With 20 pins
Operate supply voltage at 5V
JM38510/30601B2A Applications
There are a lot of Texas Instruments JM38510/30601B2A Shift Registers applications.
- Flash Memory
- Data manipulation
- store data in digital form
- data manipulation
- Dual-rank shift, hold, and bus applications
- 7-segment display control
- Serial to parallel converter
- temporary data storage
- data transfer
- Remote control holding register