IXDN604SIA
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Number of Channels | 2 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Output Current | 4A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Rise Time | 9ns |
| Fall Time (Typ) | 8 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IXDN604SIA Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tube is used.A total of 2 drivers are integrated into its configuration.Surface Mount is mounted in the way of the device.In the absence of a 4.5V~35V supply voltage, it can demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.This device allows temperatures in the range of -40°C~125°C TA.Non-Inverting is the input type used in this program.The mount method is Surface Mount.The pins are configured with 8 when designing the chip.There is a maximum output current of 4A.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.An output current of 4A is supported.A maximum operating temperature of 125°C is permissible.There is a minimum operating temperature of -40°C.Its maximum operating voltage is 35V.For operation, 4.5V is the minimum supply voltage.With a 10μA supply voltage, it operates.There are 2 channels configured for operation.
IXDN604SIA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDN604SIA Applications
There are a lot of IXYS Integrated Circuits Division IXDN604SIA gate drivers applications.
- Motor Controls
- Industrial Motor Inverter - Power Tools, Robotics
- LCD/LCoS/DLP portable and embedded pico projectors
- PCMCIA applications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Gate Driver Supplies
- UPS systems
- Motor Control
- Power factor correction (PFC) circuits
- High frequency line drivers