IXDN604PI
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 6 Leads |
| Number of Pins | 8 |
| Supplier Device Package | 8-DIP |
| Weight | 2.26799g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Number of Channels | 2 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Output Current | 4A |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 16ns |
| Fall Time (Typ) | 14 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
IXDN604PI Overview
The 8-DIP (0.300, 7.62mm), 6 Leads package provides greater flexibility.The packaging method is indicated by Tube.Configuration is based on 2 drivers.In the direction of Through Hole, gate drivers is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~35V supply voltage.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Mosfet driver accepts input of type Non-Inverting.Mosfet driver is mounted using Through Hole.A total of 8 pins are available on the device.As a maximum, there is 4A limit to the output current.The basis of this system consists of 2 outputs.The output current supported by the device is 4A.125°C is the maximum acceptable operating temperature.Mosfet gate drivers is permissible to operate at a temperature of -40°C.35V is its maximum operating voltage.Its minimum operating voltage is 4.5V.The device operates on a voltage of 10μA as the supply voltage.A total of 2 channels are configured for operation.
IXDN604PI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDN604PI Applications
There are a lot of IXYS Integrated Circuits Division IXDN604PI gate drivers applications.
- Isolated Gate Driver Supplies
- Portable Media Players
- Dual-Battery Systems
- Line drivers
- Digitally controlled power supplies
- Video amplifiers
- Refrigerator
- Uninterruptible Power Supplies (UPS)
- Isolated Supplies for Motor Control
- Motor controllers