IXDN502D1T/R
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*502 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 3mA |
| Input Type | Non-Inverting |
| Rise Time | 10ns |
| Fall Time (Typ) | 9 ns |
| Rise / Fall Time (Typ) | 7.5ns 6.5ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.038 µs |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDN502D1T/R Overview
Its 6-VDFN Exposed Pad package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.The configuration is supported by 2 drivers.In the direction of Surface Mount, gate drivers is mounted.WGate driversh a 4.5V~30V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a IGBT, N-Channel, P-Channel MOSFET gate.For this device, the temperature range is -55°C~150°C TJ.A type of Non-Inverting is used for input in this program.Mosfet driver consists of 6 terminations as Mosfet drivers foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IXD*502.A voltage of 15V is required for its operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A total of 6 pins are available for component connections.Due to its power supplies of 4.5/30V, it solves the power supply problem for a wide range of applications.Mosfet gate drivers is recommended that you set the operating supply voltage to 15V.
IXDN502D1T/R Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN502D1T/R Applications
There are a lot of IXYS IXDN502D1T/R gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Gate Driver Supplies
- Portable Media Players
- Multicolor LED/laser displays
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable Navigation Devices
- Topologies
- Broadcast equipment