IXDN404PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*404 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Non-Inverting |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 μs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDN404PI Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Gate drivers is packaged in the way of Tube.Configuration is based on 2 drivers.It's mounted on the way to Through Hole.By using 4.5V~35V supply voltage, it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Temperature range -55°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are 8 terminations to form the base of its configuration.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IXD*404.Through Hole is the way it takes to mount the device.In the device, there are 8 pins.With a supply voltage of 18V, it is designed to operate.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.Components with 8 pins are available.Mosfet gate drivers supports a current output of 4A.Setting the operating supply voltage to 35V is recommended.
IXDN404PI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDN404PI Applications
There are a lot of IXYS IXDN404PI gate drivers applications.
- Active filtering
- Power factor correction (PFC) circuits
- Isolated switch mode power supplies (SMPS)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial air-conditioning (CAC)
- Refrigerator
- Pulse transformer drivers
- Smart Phones
- High frequency line drivers
- Video amplifiers