IXDI614SI
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC-EP |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 1 |
| Max Output Current | 14A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Propagation Delay | 70 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 18ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 14A 14A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IXDI614SI Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.Tube represents the packaging method.This configuration includes 1 drivers.Its recommended mounting way is Surface Mount.Using a 4.5V~35V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Temperature range -55°C~150°C TJ is allowed for this device.Inverting is the input type used in this program.The mount method is Surface Mount.During design, it is configured with 8 pins.There is a maximum output current of 14A that can be achieved.In terms of its basis, there are 1 outputs integrated.125°C is the maximum acceptable operating temperature.Temperatures below -40°C are allowable as a minimum.When the supply voltage is 35V, it is at its maximum operation.This device operates at 4.5V as the minimum supply voltage.There are 1 channels configured for operation.
IXDI614SI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDI614SI Applications
There are a lot of IXYS Integrated Circuits Division IXDI614SI gate drivers applications.
- High frequency line drivers
- Motor controllers
- Industrial Power Supplies
- Power factor correction (PFC) circuits
- Head-up and Head mounted displays
- Welding
- 3-Phase Motor Inverter Driver
- High power buffers
- High-voltage isolated DC-DC converters
- Pulse transformer drivers