IXDI604PI
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-DIP |
| Weight | 2.26799g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | -300mV |
| Operating Supply Current | 1mA |
| Output Current | 4A |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 9ns |
| Fall Time (Typ) | 8 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IXDI604PI Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is package in Tube case.For its configuration, it incorporates 2 drivers.Through Hole is the way in which it is mounted.WGate driversh a 4.5V~35V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.The allowable temperature range that this device can be operated in is -40°C~125°C TA.Input type of Inverting is used.The device is mounted using Through Hole.In the device, there are 8 pins.The basis of the model has 2 outputs integrated.Mosfet gate drivers supports a current output of 4A.Operating temperatures cannot exceed 125°C.-40°C is the minimum permissible operating temperature.The maximum voltage for operation is 40V.The supply voltage of -300mV is its minimum value for operation.A voltage of 1mA is used as the supply voltage.There are 2 channels configured for operation.
IXDI604PI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDI604PI Applications
There are a lot of IXYS Integrated Circuits Division IXDI604PI gate drivers applications.
- High-voltage isolated DC-DC converters
- Portable computers
- Smart Phones
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for Motor Control
- High power buffers
- Power factor correction (PFC) circuits
- Motor controllers
- Commercial air-conditioning (CAC)