IXDI414PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 833mW |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*414 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 14A |
| Input Type | Inverting |
| Rise Time | 27ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 22ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.033 µs |
| Output Peak Current Limit-Nom | 14A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 14A 14A |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.034 µs |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
IXDI414PI Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.There is a package in the form of Tube.For its configuration, it incorporates 1 drivers.Ideally, it should be mounted in the direction of Through Hole.Using a 4.5V~35V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -55°C~150°C TJ.The input type is Inverting.Mosfet driver is based on 8 terminations.There are various related parts under its base part number IXD*414.Devices are mounted by Through Hole.At the time of design, it is configured with 8 pins.In order to operate, a voltage of 18V has to be applied.Its interface IC is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.The board has 8 component pins.An output current of 14A is supported.Its maximum power dissipation of 833mW shows its power loss capacity without overheating.As a rule of thumb, the operating supply voltage should be set to 35V.
IXDI414PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 833mW
IXDI414PI Applications
There are a lot of IXYS IXDI414PI gate drivers applications.
- High current laser/LED systems
- PCMCIA applications
- DC/DC converters
- Active filtering
- A/D drivers
- Isolated Gate Driver Supplies
- Commercial and agricultural vehicles (CAV)
- Industrial Modules
- Portable Media Players
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,