IXDD604SI
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC-EP |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Number of Channels | 2 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Output Current | 4A |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 16ns |
| Fall Time (Typ) | 14 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
IXDD604SI Overview
Its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package provides greater flexibility.Gate drivers is package in Tube case.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~35V supply voltage.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Temperature range -40°C~125°C TA is allowed for this device.Non-Inverting is used as its input type.Surface Mount is the way it takes to mount the device.When designing, the device is configured with 8 pins.An output current as high as 4A can be achieved at maximum power.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet driver supports an output current of 4A.There is a maximum operating temperature of 125°C.There is a minimum operating temperature of -40°C.In order for the device to operate, the supply voltage must be 35V.The supply voltage of 4.5V is its minimum value for operation.During operation, a voltage of 10μA is applied to the power supply.Mosfet gate drivers is configured wMosfet gate driversh 2 channels for operation.
IXDD604SI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDD604SI Applications
There are a lot of IXYS Integrated Circuits Division IXDD604SI gate drivers applications.
- 3-Phase Motor Inverter Driver
- Topologies
- Pulse transformer drivers
- Portable Navigation Devices
- serial peripheral interface (SPI), I2C
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable computers
- Motor controllers
- Isolated Gate Driver Supplies
- Motor Drives