ISPLSI 1048-50LQ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 120-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 120 |
| JESD-30 Code | S-PQFP-G120 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 31.3MHz |
| Propagation Delay | 30.7 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 6 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 24ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048-50LQ Overview
There are 192 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 120-BQFP package containing it.The device is programmed with 96 I/Os.Terminations of devices are set to [0].This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 5V volts.This part is in the family [0].Package the chip by Tray.Due to its reliability, it is operated at a temperature of [0].There should be a Surface Mounton the chip.The ispLSI? 1000series FPGA is one of these types.It is equipped with 120 pin count.You can find its related parts in the [0].There are 8000 gates, which are devices that acts as a building block for digital circuits. There are 48 logic elements or blocks present.In order for the device to operate, it requires 5V power supplies.In order to ensure proper operation, a maximum supply voltage (Vsup) of 5.25V is required.The input signals are detected by 6dedicated inputs.There should be a higher supply voltage (Vsup) than 4.75V.Its clock frequency should not exceed 31.3MHz.
ISPLSI 1048-50LQ Features
120-BQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
120 pin count
5V power supplies
ISPLSI 1048-50LQ Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048-50LQ CPLDs applications.
- Power Meter SMPS
- DMA control
- Power automation
- Pattern recognition
- D/T registers and latches
- Multiple DIP Switch Replacement
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Software-Driven Hardware Configuration
- Software Configuration of Add-In Boards
- White goods (Washing, Cold, Aircon ,...)