ISP75N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 490mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.8W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISP75 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 1.8W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 430m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISP75N Overview
It is packaged in the form of a Tape & Reel (TR).It's included in the TO-261-4, TO-261AA package.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.Keeping the temperature at -30°C~85°C TA ensures reliable operation.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.The lighting driver has Auto Restart features.As you can see, it comes from the ISP75 family.It contains 4 terminations.The 4 pins are used to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 700mA to meet the operation criteria.A supply voltage of 12V leads to high efficiency.A total of 4 pins are present on it.It has 490mOhm resistance.This electrical component can be found in the HITFET? series.This case results in a 700mA output current.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.
ISP75N Features
Supplied from 12V
Resistance of 490mOhm
ISP75N Applications
There are a lot of Infineon Technologies ISP75N Power Switches ICs applications.
- Gaming
- Storage (HDDs, SSDs)
- Set-Top Boxes
- Notebook and Tablet Computers
- USB Protection
- Hot-Swap Systems
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Various applications equipped with buttons
- Portable GPS