ISO124U/1KE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 200kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Subcategory | Isolation Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Voltage - Isolation | 1.5kV |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Temperature Grade | OTHER |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5.5mA |
| Slew Rate | 2 V/μs |
| Amplifier Type | ISOLATION AMPLIFIER |
| Max Input Voltage | 12.5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 20mV |
| Bandwidth | 50 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 0dB |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 50 kHz |
| Min Dual Supply Voltage | 4.5V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISO124U/1KE4 Overview
Packaging for the buffer amplifier is in the form of a SOIC case. A ISOLATION AMPLIFIER-type buffer amplifier is shown here. A Tape and Reel case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 15V battery. This particular linear amplifier is a type of Isolation Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 20mV. Using a supply current of 5mA , this buffer op amp will be able to operate. It is a member of the 0dB's 0dB family. For this linear amplifier to work, the temperature should not be below -25°C. You should not use op amp above 85°C . The linear amplifier consists of 1 different elements in total. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For packing the buffer amplifier, the TR-axis is adopted. There should be a dual supply voltage of 18V for you to conduct this electrical part. 200kOhm is the range in which the op amp resistance should lie.
ISO124U/1KE4 Features
8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 200kOhm
ISO124U/1KE4 Applications
There are a lot of Texas Instruments ISO124U/1KE4 Instrumentational OP Amps applications.
- Active probe
- earphone
- Division circuits
- Multimedia playback equipment
- Proportional operation circuits
- Power transmission
- Commercial audio systems
- Video amplifiers
- Broadcasting
- High-frequency data acquisition systems