ISL84543CB
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
ISL84543CB Overview
As the electronic part is packed in 8-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. It is mounted in the position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around 0°C~70°C TA. There are 8 terminations totally. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 3.3V is used, the electronic component should be turned on and run. It is part of the design of the 8 series that this electronic component is included. These analog multiplexers are built based on SPST - NO/NC switching circuits. This multiplexer is composed of 2 circuits. A voltage of 2.7V~12V is required for this switch device, which drains from a single voltage source.
ISL84543CB Features
1 Channels
Switch Circuit: SPST - NO/NC
ISL84543CB Applications
There are a lot of Rochester Electronics, LLC ISL84543CB Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Cell phones
- PDH Multiplexers
- DVD-R
- Channelized and Unchannelized DS3 applications
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- High-Voltage
- Intelligent PBX
- PCMCIA cards
- Relay Replacement