ISL84541CPZ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Height Seated (Max) | 5.33mm |
| Length | 9.585mm |
| RoHS Status | ROHS3 Compliant |
ISL84541CPZ Overview
Shipping overseas is convenient with the electronic component packed in 8-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Around 0°C~70°C TA is the extended operating temperature. A total of 8 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. An 3.3V voltage supply should allow the electrical part to be turned on and run. An injection of 8 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. The circuits in this analogue multiplexer number 2. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V.
ISL84541CPZ Features
1 Channels
Switch Circuit: SPST - NO
ISL84541CPZ Applications
There are a lot of Rochester Electronics, LLC ISL84541CPZ Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Relay Replacement
- PBX interfaces
- DSUs
- Battery Powered Systems
- Digital access cross connects
- Channelized and Unchannelized DS3 applications
- Medical Instrumentation
- Audio and video switching
- High reliability control systems