ISL8393IBZ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISL8393 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 71 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 130ns, 75ns |
| Charge Injection | 5pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -89dB @ 1MHz |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 100ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
ISL8393IBZ Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPST - NO/NC switching circuit are built. There are 4 circuits in this multiplexer. Try searching for ISL8393 variants of the analog switch ic.
ISL8393IBZ Features
1 Channels
Switch Circuit: SPST - NO/NC
ISL8393IBZ Applications
There are a lot of Renesas Electronics America Inc. ISL8393IBZ Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- SDH/SONET multiplexers
- SONET
- Cross Connects
- Avionics
- Digital Cross-Connects
- Signal routing between systems
- Imaging
- Fiber In The Loop (FITL)
- DSLAMs