ISL6721ABZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 9V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 9V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Max Supply Current | 12mA |
| Current - Output | 1A |
| Quiescent Current | 4.5mA |
| Frequency (Max) | 1MHz |
| Voltage - Output | 3.3V |
| Input Voltage (Min) | 8.2V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 75 % |
| Duty Cycle (Max) | 100 % |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL6721ABZ Overview
In the SOIC package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. A switching controller such as this can switch at a value of 1MHz . A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. Various 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 9V. 16 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 8.2V. It is set to 75 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controllers work at 1MHz Hz. DC to DC voltage regulator has a value of IT CAN ALSO OPERATE WITH CURRENT MODE to better satisfy the need. DC regulator should be kept at a temperature of -40°C or higher. A temperature of 105°C more than 105°C degrees Celsius should be maintained in the undc regulator. Total number of functions (s) for thare switch converters are 1. In a dormant state, the dc switching uses 4.5mA. 1MHz is the maximum frequency at which the controller can switch. Inputs of 1A are ideal for this component. When it is working normally, it outputs a value of 3.3V. Maximum supply voltage is 18V. There is a possibility of damage to the component if the switching voltage regulators current exceeds 12mA.
ISL6721ABZ Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
Frequency: 1MHz
IT CAN ALSO OPERATE WITH CURRENT MODE
ISL6721ABZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL6721ABZ DC to DC converter applications.
- Post equipment
- Textile machinery
- SMT equipment
- Game consoles
- Remotely powered electric motors
- Computer monitoring equipment of building
- Computer rooms
- Medical monitoring systems
- Wide-range voltage regulation circuits
- Low output voltage switching power supply circuits