ISL6540ACRZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 28 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 5V |
| Temperature Grade | COMMERCIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Max Supply Current | 13mA |
| Current - Output | 4A |
| Frequency (Max) | 2MHz |
| Voltage - Output | 20V |
| Input Voltage (Min) | 3.3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 100 % |
| Height | 900μm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL6540ACRZ Overview
With its QFN package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. This switching controller can switch at 2MHz. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at QUAD. The 28 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. In total, switching converter has 28 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator must be 3.3V. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sUsers should apply 20V to operate the voltage regulator dc to dc safely and reliably. A temperature of 0°C or higher is recommended. A temperature of 70°C degrees Celsius is recommended. As a whole, there are 1 function(s) in the switch converters. It is planned to design voltage regulators switchings with 28 pins. It is possible for the controller to switch at a frequency of 2MHz. Switching controllers with 4A inputs are ideal for it. normalworking processes output 20V voltage. A current greater than 13mA may result in improper operation and possibly damage to the component.
ISL6540ACRZ Features
Switching Frequency: 2MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ISL6540ACRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL6540ACRZ DC to DC converter applications.
- Industrial controllers
- Automatic plug-in machines
- Gear/thread machining machines
- Sink circuits
- Laboratories
- Linear guide
- Balance equipment
- Electrical power transmission
- Thermal power
- Lathes